790afd4f-76ce-437a-a24a-41fa75327e2d
743975
Έγκριση Συμμετοχής σε Εξετάσεις με σκοπό την Απόκτηση Άδειας Αρχιτεχνίτη Οξυγονοκολλητή Β' Τάξης
At a glance
Points of service
Regional units,
Points of Single Contact (ΚΕΠ – EKE), Development Directorate, Vocational Department of the Region of the place of professional establishment or the place of permanent residence
Number of required documents
Description
The procedure is the first part for the final issuance of the Chief Technician of Oxygen-Welder B class Licence. More specifically, the parts of the process are:
1. Authorisation of participation in examinations for the purpose of obtaining a Licence of Chief Technician of Oxygen-welder of Class B - the final stage is the issuance of a Certificate (Attestation) of Submission of Supporting Documents
and
2. Issuance of the Licence of Foreman of Chief Technician of Oxygen-welder B class - the final stage is the issuance of the relevant Licence
Basic information
Competent body
MINISTRY OF DEVELOPMENT
Service / organizational unit of a authority entity
Development Directorate, Vocational Department of the Region of the place of professional establishment or the place of permanent residence
Application
Application Type
Application / Solemn Declaration
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Title
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: Application– Solemn Declaration (Request description: Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class)
What you will need
Means of authentication, identification and signature
Identification document, Identification with TAXISnet codes
Related
Means of redress or appeal:
Rules concerning a lack of reply from the competent authority and the legal consequences for the use:
In case of expiration of the above deadline of 15 days, it is considered that the application of the interested party has been implicitly accepted, according to par. 4 of article 14 of Law 3844/2010 (G.G. 63/A/3-5-2010). The interested party in the above case of tacit approval may request the relevant certificate from the Issuing Authority, in accordance with par. 4 of article 10 of Law 3230/2004 (GG 44/A/2004).
Output & Results
Output
Administrative Act
Other information
Official title
Authorisation for Taking an Examination to Obtain the Oxygen-Welder Chief Technician Licence of Class B (articles 18 & 20 of PD 115/2012, GG 200 A)
Languages supported
Greek, English
Ways of provision
Establishment
Registries updated
Ενιαίο Μητρώο Προσώπων (Φ/Ν) που ασκούν Τεχνικά Επαγγέλματα σύμφωνα με το ν. 3982/2011
Categories
Trigger (submission method)
Application (digital), Application (handwritten)
N1
ΔΔ
8
0
0
0
12
0
49073
No
1749600
1317600
P10M
Defined
Identification document, Identification with TAXISnet codes
157113
25.62
5587, 7135
EU-GO
Supporting document
The procedure is the first part for the final issuance of the Chief Technician of Oxygen-Welder B class Licence. More specifically, the parts of the process are:
1. Authorisation of participation in examinations for the purpose of obtaining a Licence of Chief Technician of Oxygen-welder of Class B - the final stage is the issuance of a Certificate (Attestation) of Submission of Supporting Documents
and
2. Issuance of the Licence of Foreman of Chief Technician of Oxygen-welder B class - the final stage is the issuance of the relevant Licence
135.00
135.00
5
1
0
15 days}}
}}
}}
,
1
Possession of passwords to enter software
The applicant shall have a TAXISnet username and password.
No
No
2
Administrative
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: Submission of an application for the Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class
No
No
3
Administrative
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: The applicant must identify his / her personal details when submitting the application
No
No
4
Prior Service
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
a) The applicant must have announced the profession of Welder Technician
or
b) The applicant must have obtained the Licence of Chief Arc Welder Technician B Class
or
c) If at the time of issue of PD 115/2012 the applicant was working as a welder technician, he/she must hold one of the accepted domestic or foreign degrees - with the relevant equivalence for the latter
or
d) If the applicant is a citizen of an EU member state and has acquired his/her professional qualifications in another Member State, either as a self-employed or as an employee, these professional qualifications must have been recognized by the competent authority of the country.
No
No
5
Educational
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
If the applicant is a Welder Technician, then if he/she holds a degree from:
a) A Vocational School (EPAS) in the specialty of Chassis or Metal Structures or Shipbuilding, then he/she must have acquired 2 months of previous work experience.
or
b) A Technical Vocational High School (TEL) in the specialty of Mechanical Engineering
or
c) A Technical Vocational School (TEE) B Cycle in the specialty of Mechanical Engineering
or
d) A Vocational High School (EPAL) in the Mechanical Engineering Sector, specialty of Mechanical Installations and Structures,
then he/she must have acquired 6 months of previous work experience
or
e) A Technical School of the Mechanical Engineering specialties group
f) A Technical Vocational School (TEE) A Cycle, in the Mechanical Engineering Sector, then he/she must have acquired 10 months of previous work experience
or
g) A High school and has reached the age of 18 years
then he/she must have acquired 18 months of previous work experience.
No
No
6
Educational
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: If the applicant has obtained a degree after the issuance of the relevant Licence, he/she must prove it by submitting the relevant degree.
No
No
7
Prior Service
If the applicant is a Master Welder, class B, he/she must have 6 months of experience as a craftsman welder.
In case the applicant of any of the above categories has attended a special vocational training programme, the relevant experience required may be replaced by up to 25% of attendance of one or more special vocational training programmes, after issuance of a certificate of notification or a valid licence.
Those who hold a qualification obtained abroad (within and outside the EU) in a corresponding field of study, if it has been recognised as equivalent to the above-mentioned qualifications, the experience is equivalent to the recognition obtained.
Alternative condition of
4
Yes
Yes
1
Authorisation of participation in exams: Administrative fee
23 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
2
Issuance of Foreman of Chief Technician of Oxygen-welder B class: Participation fee for the theoretical exam
33 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
3
Issuance of Foreman of Chief Technician of Oxygen-welder B class: Participation fee for the practical exam
79 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
1
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
Photocopy of police ID or passport
If the applicant is a citizen of a non-EU country, a residence or work permit issued in accordance with the provisions in force is also submitted.
Identification document
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
Photocopy of police ID or passport
If the applicant is a citizen of a non-EU country, a residence or work permit issued in accordance with the provisions in force is also submitted.
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
2244
2
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
a) Clear copy of the Attestation of Announcement of Welder Technician
or
b) Clear copy of the Licence of Chief Welder Technician B class
or
c) Copy of degree (for those obtained abroad, along with an Equivalence Decision by the EOPPEP)
or
d) Decision of Recognition of professional qualifications by the SAEP.
Approval
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class:
a) Clear copy of the Attestation of Announcement of Welder Technician
or
b) Clear copy of the Licence of Chief Welder Technician B class
or
c) Copy of degree (for those obtained abroad, along with an Equivalence Decision by the EOPPEP)
or
d) Decision of Recognition of professional qualifications by the SAEP.
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
8880
3
1. If the applicant worked as an employee:
Proof of previous work experience from the company where the applicant was employed, co-signed by the supervisor (holder of a Licence or an attestation of announcement), in which the details of the employer and the supervising Licencee or holder of the attestation of announcement - Licence number and issuing authority - the details of the person concerned, the duration of employment - exact time of employment in wages -, the specialty and the level to which the person concerned has been trained shall appear.
Proof of Previous Service
1. If the applicant worked as an employee:
Proof of previous work experience from the company where the applicant was employed, co-signed by the supervisor (holder of a Licence or an attestation of announcement), in which the details of the employer and the supervising Licencee or holder of the attestation of announcement - Licence number and issuing authority - the details of the person concerned, the duration of employment - exact time of employment in wages -, the specialty and the level to which the person concerned has been trained shall appear.
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Civil servants
Document submitted under requirements:
No
No
4441
4
6. In case of inability to present the above-mentioned supporting documents, as a result of the destruction of records or employment records or from another cause, the following may be accepted as evidence:
Booklets of insurance stamps, as well as any other public document, from which the employment of the applicant in a job position with the same or related object is deduced and the interested party must substantiate in his/her application the reasons for which he/she is unable to provide the necessary supporting documents.
One or more supporting documents are submitted that cover as a minimum the required total duration of previous professional experience.
If the previous experience was acquired in another EU member state the corresponding supporting documents must be validated for their authenticity by the respective competent authorities of that Member State.
Proof of Previous Service
6. In case of inability to present the above-mentioned supporting documents, as a result of the destruction of records or employment records or from another cause, the following may be accepted as evidence:
Booklets of insurance stamps, as well as any other public document, from which the employment of the applicant in a job position with the same or related object is deduced and the interested party must substantiate in his/her application the reasons for which he/she is unable to provide the necessary supporting documents.
One or more supporting documents are submitted that cover as a minimum the required total duration of previous professional experience.
If the previous experience was acquired in another EU member state the corresponding supporting documents must be validated for their authenticity by the respective competent authorities of that Member State.
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
5
5. If the applicant has acquired experience as an extended-term reserve private or a reserve officer during the fulfillment of his military obligations:
Attestation from a competent military authority, indicating in detail the type of service performed and its duration
Proof of Previous Service
5. If the applicant has acquired experience as an extended-term reserve private or a reserve officer during the fulfillment of his military obligations:
Attestation from a competent military authority, indicating in detail the type of service performed and its duration
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
6
4. If the applicant attended a special professional training program:
Certificate of attendance of the special professional training program
Proof of Previous Service
4. If the applicant attended a special professional training program:
Certificate of attendance of the special professional training program
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
7
3. If the applicant was employed in Public Sector, Legal Entity of Public or Private Law and Local Government Authorities:
Hiring decision from which it can be deduced that the applicant and/or the supervisor was hired as a Technician, Chief Technician or Foreman of installations or Decision of the competent authority assigning the tasks of technician, chief technician or foreman, to the interested person, provided that he/she has the required Licence, or, in the case of the technician, an attestation of announcement
Proof of Previous Service
3. If the applicant was employed in Public Sector, Legal Entity of Public or Private Law and Local Government Authorities:
Hiring decision from which it can be deduced that the applicant and/or the supervisor was hired as a Technician, Chief Technician or Foreman of installations or Decision of the competent authority assigning the tasks of technician, chief technician or foreman, to the interested person, provided that he/she has the required Licence, or, in the case of the technician, an attestation of announcement
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
8
2. If the applicant worked as a self-employed:
Solemn Declaration of Law 1599/1986 stating: a) the duration of the previous work experience with reference to the specialty and the level of employment of the applicant, b) that he/she was employing by a project or employment contract a supervising Licence or a person entitled to supervise - with reference to the name and the number of the Certificate of Announcement or Licence of the supervisor, c) that the average annual turnover exceeds 60% of the average annual individual disposable income (MEADE), as calculated by ELSTAT. during the period of acquisition of the experience and d) that he/she possesses the supporting documents described in paragraphs 2.1., 2.2. and 2.3. of article 6 of PD 115/2012.
Proof of Previous Service
2. If the applicant worked as a self-employed:
Solemn Declaration of Law 1599/1986 stating: a) the duration of the previous work experience with reference to the specialty and the level of employment of the applicant, b) that he/she was employing by a project or employment contract a supervising Licence or a person entitled to supervise - with reference to the name and the number of the Certificate of Announcement or Licence of the supervisor, c) that the average annual turnover exceeds 60% of the average annual individual disposable income (MEADE), as calculated by ELSTAT. during the period of acquisition of the experience and d) that he/she possesses the supporting documents described in paragraphs 2.1., 2.2. and 2.3. of article 6 of PD 115/2012.
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
9
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: Copy of degree
Proof of Study
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: Copy of degree
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
2825
10
Issuance of a Licence of Chief Welder Technician B Class:
Two recent photos.
Photograph
No
8298
11
If the degree has been obtained abroad, the applicant must also present: Equivalence decision of the Hellenic Organization for the Certification of Qualifications and Professional Guidance (EOPPEP).
Proof of Study
If the degree has been obtained abroad, the applicant must also present: Equivalence decision of the Hellenic Organization for the Certification of Qualifications and Professional Guidance (EOPPEP).
Document submitted under requirements:
Yes
Document’s requirement:
Educational
No
2825
Law
32
4608
2019
66
Α
Description
Replacement of existing Licences
Joint Ministerial Decision
8774/15/Φ.350/
2018
340
Β
Description
Appointment of an examination committee of a Region for conducting examinations for several regions
Ministerial Decision
46214/146/
2017
203
Υ.Ο.Δ.Δ.
Description
Determination of Compensation of the Examination Committees
Law
112
4314
2016
265
Α
Description
Date of commencement Licences
Presidential Decree
122
2014
196
Α
Description
Vocational Training Programs
Joint Ministerial Decision
455/22/Φ.Γ.9.6.4./
2013
32
Β
Description
Inclusion in ΚΕP-EKE (Points of Single Contact)
Joint Ministerial Decision
458/26/Φ.Γ.9.6.4/
2013
34
Β
Description
Inclusion in ΚΕP-EKE (Points of Single Contact)
Joint Ministerial Decision
8441/560/ΦΓ9.6.4/
2013
1643
Β
Description
Annex C (Examination material of Technical Mechanical Installations 1st, 2nd, 3rd and 4th Specialty
Joint Ministerial Decision
14132/924/ΦΓ9.6.4./
2013
3133
Β
Description
Licensing of examination bodies for the issuance of a Licence to practice technical professions
Joint Ministerial Decision
411/14/Φ.Γ.9.6.4./
2013
21
Β
Description
Examination procedure
Presidential Decree
115
2012
200
Α
Description
Prerequisites - Supporting Documents - Procedure – Checks
Law
3982
2011
143
Α
Description
Procedure - Definitions - Scope of responsibility
1
Authorisation to participate in examinations: Presentation of application and supporting documents
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: The applicant presents the Application - Solemn Declaration with the attached required supporting documents to an executive of the Department of Professions
No
No
2
Authorisation to participate in examinations: Notification of interested party
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Authorisation to participate in examinations for a Licence of Chief Oxygen-welder Technician B Class: An executive of the Department of Professions notifies the interested party to come and collect the Attestation of Submission of supporting documents and the invitation to take the examination; he/she forwards a copy of the signed Attestation above, to the Examination Committee
No
No
3
Issuance of Licence: Submission of proof of payment
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
The applicant submits the proof of deposit of the examination fees of the theoretical and practical part to the Department of Professions
No
No
4
Issuance of Licence: Theoretical examination
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
The applicant is examined on the theoretical part of the specialty by the Examination Committee
Notes
In case the interested party fails in the examination of the theoretical part, he / she re-submits the application for participation in the examinations. The Certificate of Submission of Supporting Documents (if valid) and the participation fee for the examinations of the theoretical part shall be re-attached.
No
No
5
Issuance of Licence: Preparation of the Examination Report for the theoretical part
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
The Examination Committee prepares a Minutes of Examination of the theoretical part with the detailed list of successful and unsuccessful, which is signed by all the members and is given to the applicant.
No
No
6
Issuance of Licence: Examination in the practical part
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
The applicant is examined on the practical part of the specialty by the Examination Committee
Notes
In case the interested party fails in the examination of the practical part, he / she re-submits the application for participation in the examinations. The Certificate of Submission of Supporting Documents (if in force), the Minutes of the theoretical part examination and the participation fee for the practical part examinations shall be attached.
No
No
7
Issuance of Licence: Certificates of Successful Examination
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
The Examination Committee prepares Minutes of the Examination of the practical part with the detailed list of the successful and failed candidates, and of Certificates of Successful Examination, which is signed by all the members and is finally issued to the applicant
No
No
8
Issuance of the licence: Collection of the Licence
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Issuance of Licence of Chief Oxygen-welder Technician B Class:
An Executive of the Department of Professions issues the Licence of Chief Oxygen-welder Technician B Class and notifies the applicant to collect it.
Notes
An interested party who considers that his/her application has not been accepted without a legitimate reason or that the administration is unreasonably late, may appeal to the ordinary court against the act or omission of the administrative authority.
No
Yes
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
