393018License for the temporary manufacture, modification, assembly of samples of firearms or their essential parts

From National Registry of Administrative Public Services

43a26201-c8e1-4875-8b32-b4b403bf2db2 393018 Άδεια προσωρινής κατασκευής, μετασκευής, συναρμολόγησης, δειγμάτων πυροβόλων όπλων ή ουσιωδών συστατικών μερών τους

At a glance

Points of service

Police Stations, Points of Single Contact (ΚΕΠ – EKE), Country Security Sub-Directorates, Country Security Departments, DIRECTORATE-GENERAL OF STATE SECURITY/SECURITY/SECURITY

Digital provision points

Number of required documents

Not required

Fees

151.2 €

Deadline of completion

4 months

Description

The procedure concerns the granting of a temporary licence to businesses for the manufacture, modification, assembly, processing or repair of firearms within the State, provided that the prescribed conditions for the establishment and operation of the relevant businesses for the issue of a copy of a certificate of conformity or approval of transfer for the manufacture or assembly of the items are met.
  • The manufacture, modification or assembly of category A firearms and category B long-barrelled firearms (other than weapons for shooting or hunting) is prohibited. It is addressed to businesses.

Basic information

Authority responsible for the provision of the procedure

Service / organizational unit of a authority entity

DIRECTORATE-GENERAL OF STATE SECURITY/SECURITY/SECURITY

Provided to

Notes

Sub-addresses or Security Departments.

Last update

03/12/2024

Application

Application Type

Application

Submission by:

Submitted by the applicant (digital), Submitted by the applicant (in person or by post)

Submitted by:

Legal entities

Title

Application by the interested party stating the reasons for and the type of licence applied for, the name or trade name and registered office of the company and the details of its representative, namely: Surname, First Name, Fathers Name, Mothers Name, Date and place of birth, Address of residence, Identity card or passport number, date of issue and issuing authority, occupation, telephone number and e-mail address.

What you will need

Means of authentication, identification and signature

Identification document, Identification with TAXISnet codes

    Print

    Requirements

    • 1 Company law Business recommendation (individual, corporate) *For company recommendation see link below

      Link Link

    • 2 Possession of passwords to enter software Applicant to be TAXISnet code holder

      Link Link

    • 3 Professional To be a licence for the marketing of firearms.

    • 4 Medical In the case of an individual undertaking, the applicant shall not suffer and shall not be hospitalised for major mental disorder or serious personality disorder. In any other case, a legal person, this condition applies to all representatives and managers for S.H.I. and E.E. and to the fellow partners for U.E. and EU....

    • 5 Conditions for non-commission of criminal offenses In the case of an individual undertaking, the applicant should not have been sentenced irrevocably for a. any breach of his own indictment and committed with intent for which at least 2 years has been imprisoned; b. any breach of provisions of Law 2168/93 and Law 3500/2006. Also, no criminal prosecution has been brought to the applicant for: a. acts punishable to the extent of a crime, b. infringements of the laws on drugs and society protection against organised crime, for terrorist acts, infringements of provisions concerning fishing with explosives or toxic substances and infringements of Law 15 of Law 2168/93 c. acts provided for in Law 3500/2006.

    • 6 Urban planning There is an empty space - a factory or a laboratory, which fulfils all the urban obligations and security measures for its safe operation, as well as for the safe storage of firearms produced.

    • 7 Professional In the case of an individual undertaking, do not all the incompatible properties in the applicant’s person. In any other form, this condition applies to all representatives and managers for S.E. and E.E. and to the co-workers for U.E. and E.E.....

    Fees

    • 1 Marketing authorisation N.2168/93 or N.456/76, construction/ repair/assembly, gaming/reconstructing of cartridges 151.2 €

      e-Administrative Fee code 6020

      Cost Calculation One-off

      Method of Payment Bank cashier, Digital (debit / credit card), Digital (web banking)

      Type of Cost Administrative Fee (not provided by e-paravolo webpage)

      Fee Link Link

    Related

    Means of redress or appeal:

    Administrative appeal

    Rules concerning a lack of reply from the competent authority and the legal consequences for the use:

    Other

    In all cases, the competent Police Authority issues a positive (issuing a permit) or negative (issuing a decision to reject the request) response. The absence of a response does not imply implicit approval or rejection of the request.

    NACE

    • 46.18 Agents specialised in the sale of other particular products

    Output & Results

    Output

    Decision

    Steps

    • 1 Initiation of proceedings

    • 2 Receive and check the application and other supporting documents.

      Responsible for Implementation Competent Department

      Μethod of Implementation Manual Action

      Description The Police Department or Department or Security Directorate of the place where the activity is carried out receives from the person concerned his application and the supporting documents attached thereto and carry out a complete check on them.

    • 3 Electronic Submission of Application and Supporting Documents

      Μethod of Implementation Software action

    • 4 Definition of a Tripartite Commission and control of the undertaking

      Responsible for Implementation Competent Department

      Μethod of Implementation Inspection

      Description After verification of the supporting documents, a three-member Commission shall be appointed, with the chief officer, to carry out the inspection of the undertaking as to whether the conditions of security laid down are fulfilled.

      Notes In the event of an authorisation to operate a factory or laboratory or warehouse, an examination may be carried out for the completeness of the necessary security measures, provided that this finding is easy and does not require any special technical knowledge from the police, so that a qualified official of the Office responsible for the area of the Ministry of Justice is required to be assisted and a report is drawn up.

    • 5 Adopted by the Commission on 18 December.

      Responsible for Implementation Collective body

      Μethod of Implementation Inspection

      Description In the event of failure to comply with the necessary safety measures, the Commission shall indicate in writing whether the necessary measures are taken within a fixed period of time after the undertaking has been re-inspected; in the event of failure to comply with the above instructions, it shall be informed that the request will be rejected.

      Notes In the event of an authorisation to operate a factory or laboratory or warehouse, an examination may be carried out for the completeness of the necessary security measures, provided that this finding is easy and does not require any special technical knowledge from the police, so that a qualified official of the Office responsible for the area of the Ministry of Justice is required to be assisted and a report is drawn up.

    • 6 Documents shall be transmitted to the competent police or security department.

      Responsible for Implementation Competent Department

      Μethod of Implementation Digital signature

      Description At the end of the inspection of the operation and the preparation of the report concerned, the application shall be submitted to the Directorate responsible for Police or Security attached to it as well as to the written opinion of the competent department.

    • 7 Documents transmitted to the State Security Directorate/A.D.

      Responsible for Implementation Competent Directorate

      Μethod of Implementation Digital signature

      Description The Competent Directorate for Police or Security, after checking the submitted supporting documents, shall submit them to the State/State Security Directorate, together with its relevant opinion.

    • 8 Judgment

      Responsible for Implementation Competent Directorate

      Μethod of Implementation Signature

      Description The State/Service Directorate shall, after checking the submitted supporting documents, issue a decision either rejecting the request or issuing a manufacturing licence.

      Notes In the event of a negative decision-rejecting, the party concerned shall have the right to lodge an appeal within one month of its performance.

    • 9 Forwarding the decision to the Competent Department for service.

      Responsible for Implementation Competent Directorate

      Μethod of Implementation Digital signature

      Description The State/Security Directorate shall forward the decision to the Department responsible for service to the person concerned. The decision shall also be forwarded to the competent Police or Security Directorate and the relevant IOC for information.

      Notes In the event of a negative decision-rejecting, the party concerned shall have the right to appeal within one month of its performance.

    • 10 Performance of the decision to the party concerned.

      Responsible for Implementation Competent Department

      Μethod of Implementation Manual Action

      Description The Police Department or Department or Security Department in the region of which the activity is carried out shall give the decision to the person concerned.

      Notes In the event of a negative decision-rejecting, the party concerned shall have the right to appeal within one month of its performance.

    Other information

    Official title

    License for the temporary manufacture, modification, assembly, samples of firearms or their essential components that may be imported, (including the transfer of the items to an organisation certified by the EU to issue a certificate of suitability). The manufacture of category A firearms and category B long guns is prohibited (except for hunting and shooting).

    Languages supported

    Greek, English

    Ways of provision

    Establishment

    Legislation

    • Law 2518/1997 (Government Gazette 164/Α) Articles 2

      Description Licences - Conditions.

      Legal references Link

    • Law 2168/1993 (Government Gazette 147/Α) Articles 5

      Description Construction inside.

      Legal references Link

    • Joint Ministerial Decision 1016/6/291-μγ/2011 (Government Gazette 2636/Β) Articles 1 § 1, περ. ε

      Description Simplification and integration in the Civil Service Centres (K.E.P.) operating as Single Services Centres (E.C.E.) procedures of the Greek Police in implementation of the provisions of Law 3844/2010.

      Legal references Link

    • Joint Ministerial Decision 7011/1058-ιδ/2004 (Government Gazette 1338/Β) Articles 1 § 1, περ. α

      Description To set deadlines.

      Legal references Link

    • Ministerial Decision 3009/2/23-α/1994 (Government Gazette 696/Β) Articles 1, 2 παρ. Ι περ. 1, 3, 5 παρ. Ι περ. 1, 6, 8, 9, 10

      Description Justifications and procedure for issuing licences provided for in the provisions of Law 2168/1993 and No 456/1976.

      Legal references Link

    • Ministerial Decision 3009/2/28-γ/1994 (Government Gazette 461/Β) Articles 1, 3

      Description Obligation of safety measures - Factories/laboratories for the manufacture, conversion and assembly of firearms and fusion/reconstructing of cartridges.

      Legal references Link

    Categories

    Τype of procedure

    Trigger

    Applied for

    Trigger (submission method)

    Application (handwritten), email

    Type

    Outgoing

    End of Process

    Ιndefinite

    N1
    Cookies help us deliver our services. By using our services, you agree to our use of cookies.