ΔΔ:License for the temporary manufacture, modification, assembly of samples of firearms or their essential parts

43a26201-c8e1-4875-8b32-b4b403bf2db2 393018 Άδεια προσωρινής κατασκευής, μετασκευής, συναρμολόγησης, δειγμάτων πυροβόλων όπλων ή ουσιωδών συστατικών μερών τους

• At a Glance
• Basic information
• Application
• What you will need
• Requirements
• Fees
• Related
• Output
• Steps
• Digital steps
• Other information
• Feedback
• Legislation
• Categories
• Show Procedure
  • Steps
  • Digital Steps

At a glance

Points of service

Police Stations, Country Security Sub-Directorates, Country Security Departments, Points of Single Contact (ΚΕΠ – EKE), DIRECTORATE-GENERAL OF STATE SECURITY/SECURITY/SECURITY

Digital provision points

• EUGO portal (information only)

Number of required documents

Not required

Fees

151.2 €

Deadline of completion

4 months

Description

The procedure concerns the granting of a temporary licence to businesses for the manufacture, modification, assembly, processing or repair of firearms within the State, provided that the prescribed conditions for the establishment and operation of the relevant businesses for the issue of a copy of a certificate of conformity or approval of transfer for the manufacture or assembly of the items are met.

• The manufacture, modification or assembly of category A firearms and category B long-barrelled firearms (other than weapons for shooting or hunting) is prohibited. It is addressed to businesses.

Basic information

Competent body

MINISTRY OF CITIZEN PROTECTION

Authority/Public body’s Unit responsible for the institutional framework of the procedure

Authority responsible for the provision of the procedure

HELLENIC POLICE

Service / organizational unit of a authority entity

DIRECTORATE-GENERAL OF STATE SECURITY/SECURITY/SECURITY

Provided to

Businesses

Related links

Notes

Sub-addresses or Security Departments.

Last update

31/07/2026

Application

Application Type

Application

Submission by:

Submitted by the applicant (digital), Submitted by the applicant (in person or by post)

Submitted by:

Legal entities

Title

Application by the interested party stating the reasons for and the type of licence applied for, the name or trade name and registered office of the company and the details of its representative, namely: Surname, First Name, Fathers Name, Mothers Name, Date and place of birth, Address of residence, Identity card or passport number, date of issue and issuing authority, occupation, telephone number and e-mail address.

What you will need

Means of authentication, identification and signature

Identification with TAXISnet codes, Identification document

Print

Requirements

Fees

Related

See also

Commencement of Operation and Attribution of Tax Registration Number to Service Providers, Legal Entities (without Establishment)

Means of redress or appeal:

Administrative appeal

Rules concerning a lack of reply from the competent authority and the legal consequences for the use:

Other

In all cases, the competent Police Authority issues a positive (issuing a permit) or negative (issuing a decision to reject the request) response. The absence of a response does not imply implicit approval or rejection of the request.

NACE

Output & Results

Output

Decision

Steps

Digital steps

Other information

Official title

License for the temporary manufacture, modification, assembly, samples of firearms or their essential components that may be imported, (including the transfer of the items to an organisation certified by the EU to issue a certificate of suitability). The manufacture of category A firearms and category B long guns is prohibited (except for hunting and shooting).

Languages supported

Greek, English

Ways of provision

Establishment

Legislation

Categories

Τype of procedure

Weapons licenses

Trigger

Applied for

Trigger (submission method)

email, Application (handwritten)

Life events

Starting up and closing down a business

Type

Outgoing

End of Process

Ιndefinite

N1

   ΔΔ
   
   8
   2
   0

0 6

   0
   
   

   23371
   
   No
   9720450
   6480450
   
   
   
   
   Identification with TAXISnet codes, Identification document
   954798
   31247
   
   46.18
   
   4272, 4895, 5092, 7135
   
   EU-GO
   Supporting document

The procedure concerns the granting of a temporary licence to businesses for the manufacture, modification, assembly, processing or repair of firearms within the State, provided that the prescribed conditions for the establishment and operation of the relevant businesses for the issue of a copy of a certificate of conformity or approval of transfer for the manufacture or assembly of the items are met.

• The manufacture, modification or assembly of category A firearms and category B long-barrelled firearms (other than weapons for shooting or hunting) is prohibited. It is addressed to businesses.

151.20 151.20 0 0 0

   4 months

1 Company law "Establishment of a business (individual, company) For company establishment see the link below"

Link https://www.gov.gr/ipiresies/epikheirematike-drasterioteta/enarxe-kai-luse-epikheireses/sustase-epikheireses

No No

2 Possession of passwords to enter software The applicant must be a holder of TAXISnet login credentials

Link https://www.gov.gr/arxes/anexartete-arkhe-demosion-esodon-aade/anexartete-arkhe-demosion-esodon-aade/elektronike-eggraphe-diakheirise-kodikon-taxisnet

No No

3 Professional Have a valid firearms trading licence.

No No

4 Medical In the case of an individual enterprise, the applicant must not be suffering from and have not been hospitalised for a major mental disorder or serious personality disorder. in any other form of business this requirement applies to all representatives and managers in the case of S.A. and limited liability companies and general partners in the case of general partnership companies and limited partnership companies.

No No

5 Conditions for non-commission of criminal offenses In the case of an individual enterprise, the applicant must not have been irrevocably convicted of a. any misdemeanour prosecuted ex officio and committed with intent, for which a prison sentence of at least 2 years was imposed and b. any misdemeanour provided for by the provisions of Law 2168/93 and Law 3500/2006. Also, the applicant must not have been prosecuted for: a. acts punishable as a felony, b. violations of the laws on drugs and protection of society from organised crime, terrorist acts, violations of provisions concerning fishing with explosives or toxic substances and violations of Article 15 of Law 2168/93, c. acts provided for in Law 3500/2006. In any other case of an enterprise, this requirement applies to all representatives and managers in the case of companies limited by shares and partnerships and to partners in the case of companies limited by shares and partnerships.

No No

6 Urban planning There must be licensed premises - factory or workshop, which must meet all planning obligations as well as safety measures for its safe operation and the safe storage of the firearms produced.

No No

7 Professional In the case of an individual enterprise, the applicant must not have any incompatible qualities. In any other form of enterprise, this requirement applies to all representatives and managers in the case of S.A. and limited liability companies and general partners in the case of general partnership companies and limited partnership companies.

No No

1 Trading licence of articles under Law 2168/93 or Law 456/76, for the manufacture/repair/assembly, charging/recharging of gun cartridges. 151.2 €

e-Administrative Fee code 6020

Cost Calculation One-off

Method of Payment Bank cashier, Digital (web banking), Digital (debit / credit card)

Type of Cost Administrative Fee (not provided by e-paravolo webpage)

Fee Link https://www1.gsis.gr/sgsisapps/eparavolo/public/welcome.htm

No

Law 5 2168 1993 147 Α

Description Construction on the interior.

Legal references https://api.et.gr/apiLAW/1/1993/2168/pdf

Law 2 2518 1997 164 Α

Description Licences - Requirements

Legal references https://api.et.gr/apiFEK/1/1997/164/pdf

Joint Ministerial Decision 1 § 1, point (e) 1016/6/291-μγ 2011 2636 Β

Description Simplification and inclusion in Citizen Service Centres operating as Points of Single Contact of procedures falling within the remit of the Hellenic Police, pursuant to Law 3844/2010.

Legal references https://api.et.gr/apiFEK/2/2011/2636/pdf

Joint Ministerial Decision 1 § 1, point (a) 7011/1058-ιδ 2004 1338 Β

Description Determination of time limits.

Legal references https://api.et.gr/apiFEK/2/2004/1338/pdf

Ministerial Decision 1, 2 para. I point 1, 3, 5 para. I point 1, 6, 8, 9, 10 3009/2/23-α 1994 696 Β

Description Supporting documents and procedure for issuing the licenses provided by the provisions of Law 2168/1993 and 456/1976.

Legal references https://api.et.gr/apiFEK/2/1994/696/pdf

Ministerial Decision 1, 3 3009/2/28-γ 1994 461 Β

Description Obligation to take safety measures — factories and workshops manufacturing, converting and assembling firearms and loading or reloading cartridges.

Legal references https://api.et.gr/apiFEK/2/1994/461/pdf

1 Initiation of proceedings

No No

0 0

2 Receipt and check of the application and the attached supporting documents.

Responsible for Implementation Competent Department

Μethod of Implementation Manual Action

Description The police station or department or sub-division where the activity is carried out shall receive the application and the supporting documents attached from the person concerned and shall check that they are complete.

Yes No

P15D P10D

1

3 Electronic Submission of Application and Supporting Documents

Μethod of Implementation Software action

Yes No

PT15M PT15M

1

4 Definition of a three-member committee and audit

Responsible for Implementation Competent Department

Μethod of Implementation Inspection

Description After checking the supporting documents submitted, a three-member committee, headed by an officer, is appointed to audit the business to ensure that the security conditions imposed are met.

Notes In the case of a factory or laboratory or warehouse licensed by the Ministry of Industry, Energy and Technology, an inspection may be carried out to check that the security measures are in place, provided that this is easy to do and does not require any particular technical knowledge on the part of the police officers, in which case the assistance of a qualified official from the competent local Service of Ministry of Industry, Energy and Technology will be requested and a report will be drawn up.

No No

P15D P10D

5 Issuance of the committee desicion

Responsible for Implementation Collective body

Μethod of Implementation Inspection

Description The committee shall issue a decision after the inspection of the business. If the required safety measures are not complied with, the necessary measures to be established shall be indicated in writing within a specified period of time, after which the establishment shall be inspected again. If the party concerned fails to comply with the above instructions, there shall be a notification that the application will be rejected.

Notes In the case of a factory or laboratory or warehouse licensed by the Ministry of Industry, Energy and Technology, an inspection may be carried out to check that the security measures are in place, provided that this is easy to do and does not require any particular technical knowledge on the part of the police officers, in which case the assistance of a qualified official from the competent local Service of Ministry of Industry, Energy and Technology will be requested and a report will be drawn up.

No No

P15D P10D

6 Forwarding documents to the Competent Police or Security Directorate

Responsible for Implementation Competent Department

Μethod of Implementation Digital signature

Description Once the inspection of the business has been completed and the relevant report has been drawn up, the application with the supporting documents attached to it and the written opinion of the competent Department shall be submitted to the competent Police or Security Directorate.

No No

P15D P10D

7 Forwarding documents to the State Security Directorate

Responsible for Implementation Competent Directorate

Μethod of Implementation Digital signature

Description The competent Police or Security Directorate, after checking the documents submitted, submits them to the State Security Directorate, together with its opinion.

No No

P15D P10D

8 Issuance of a desicion

Responsible for Implementation Competent Directorate

Μethod of Implementation Signature

Description The State Security Directorate shall, after examining the supporting documents submitted, issues a decision either rejecting the request or issuing a repair license.

Notes If a negative decision is issued, the party concerned has the right to lodge an appeal within one month of the date of service of the decision.

No No

P15D P10D

9 Forwarding the decision to the Competent Department for service.

Responsible for Implementation Competent Directorate

Μethod of Implementation Digital signature

Description The State Security Directorate shall forward the decision to the competent department for service on the person concerned. The decision shall also be forwarded to the competent Police or Security Directorate and to the competent Directorate of Taxes in order to be informed.

Notes If a negative decision is issued, the party concerned has the right to lodge an appeal within one month of the date of service of the decision.

No No

P15D P10D

10 Service of the decision

Responsible for Implementation Competent Department

Μethod of Implementation Manual Action

Description The Police department or Security Department or Security Subdivision in whose district the activity is carried out shall serve the decision on the person concerned.

Notes Rejection Decision: If a negative decision is issued, the party concerned has the right to lodge an appeal within one month of the date of service of the decision.

No Yes

P15D P10D