8b772f2a-843d-4ab3-8557-09c13bedaec8
877228
Έγκριση Συμμετοχής σε Εξετάσεις με σκοπό την Απόκτηση Άδειας Αρχιτεχνίτη Οξυγονοκολλητή Α' Τάξης
At a glance
Points of service
Regional units,
Points of Single Contact (ΚΕΠ – EKE), Development Directorate, Vocational Department of the Region of the place of professional establishment or the place of permanent residence
Number of required documents
Description
The procedure is the first part for the final issuance of the Chief Technician of Oxygen-Welder A class licence. More specifically, the parts of the process are:
1. Authorisation of participation in examinations for the purpose of obtaining a licence of Chief Technician of Oxygen-Welder A class - the final stage is the issuance of a Certificate (Attestation) of Submission of Supporting Documents – and
2. Issuance of the licence of Foreman of Chief Technician of Oxygen-Welder A class - the final stage is the issuance of the relevant licence.
Basic information
Competent body
MINISTRY OF DEVELOPMENT
Service / organizational unit of a authority entity
Development Directorate, Vocational Department of the Region of the place of professional establishment or the place of permanent residence
Application
Application Type
Application
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Title
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Application– Solemn Declaration (Request description: Authorisation to participate in examinations for a licence of Chief Welder Technician A Class)
What you will need
Means of authentication, identification and signature
Identification document, Identification with TAXISnet codes
Related
Means of redress or appeal:
Rules concerning a lack of reply from the competent authority and the legal consequences for the use:
Approval of participation in exams: In case of expiration of the above deadline of 15 days, it is considered that the application of the interested party has been implicitly accept-ed, according to par. 4 of article 14 of Law 3844/2010 (G.G. 63/A/3-5-2010). The interested party in the above case of tacit approval may request the relevant certificate from the Issuing Authority, in accordance with par. 4 of article 10 of Law 3230/2004 (GG 44/A/2004).
Output & Results
Output
Administrative Act
Other information
Official title
Authorisation for Taking an Examination to Obtain the Oxygen-Welder Chief Technician A Class Licence (articles 18 & 20 of PD 115/2012, GG 200 A)
Languages supported
English
Ways of provision
Establishment
Registries updated
Ενιαίο Μητρώο Προσώπων (Φ/Ν) που ασκούν Τεχνικά Επαγγέλματα σύμφωνα με το ν. 3982/2011
Categories
Trigger (submission method)
Application (digital), Application (handwritten)
N1
ΔΔ
9
0
0
49073
No
1749600
1317600
P10M
Defined
Identification document, Identification with TAXISnet codes
157113
25.62
5587, 7135
EU-GO, SDG
Supporting document
The procedure is the first part for the final issuance of the Chief Technician of Oxygen-Welder A class licence. More specifically, the parts of the process are:
1. Authorisation of participation in examinations for the purpose of obtaining a licence of Chief Technician of Oxygen-Welder A class - the final stage is the issuance of a Certificate (Attestation) of Submission of Supporting Documents – and
2. Issuance of the licence of Foreman of Chief Technician of Oxygen-Welder A class - the final stage is the issuance of the relevant licence.
143.00
143.00
5
2
0
15 days}}
}}
}}
,
1
Possession of passwords to enter software
The applicant shall have a TAXISnet username and password.
No
No
2
Administrative
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Submission of an application for the Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class
No
No
3
Administrative
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: The applicant must identify his/her personal details when submitting the application
No
No
4
Professional
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class:
a) The applicant must have obtained the Attestation of Announcement of Welder Technician
or
b) The applicant must have obtained the licence of Chief Welder Technician B Class
or
c) The applicant must have obtained the licence of Chief Arc Welder Technician A Class
or
d) The applicant must have announced the profession of Welder B Class
or
e) The applicant must have announced the profession of Arc Welder B Class
or
f) If at the time of issue of PD 115/2012 the applicant was working as an arc welder technician, he/she must hold one of the accepted domestic or foreign degrees - with the relevant equivalence for the latter
or
g) If the applicant is a citizen of an EU member state and has acquired his/her professional qualifications in another Member State, either as a self-employed or as an employee, these professional qualifications must have been recognized by the competent authority of the country
No
No
5
Prior Service
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: If the applicant has obtained an Attestation of Announcement of Chief Welder Technician B Class, then if he/she holds a degree from:
- A university-level engineering degree – and is a registered member of the Technical Chamber of Greece (TEE) - in an engineering specialty falling under the provisions of art.1 of Law 6422/1934 or a degree in Chemical engineering or Metal Engineering or Metallurgical Engineering or Mining Engineering
- A Technological Educational Institute (TEI) degree in the specialty of Mechanical Engineering or Electrical Engineering or Energy Technology Engineering, or Shipbuilding,
then he/she must have acquired 3 months of previous work experience in welds subject to heavy strain
If the applicant has obtained a licence of Chief Welder Technician B Class, then if he/she holds a degree from:
- A Vocational School (EPAS) in the specialty of Chassis or Metal Structures or Shipbuilding,
then he/she must have acquired 10 months of previous work experience in welds subject to heavy strain.
or
- A Vocational High School (EPAL) in the Mechanical Engineering Sector, specialty of Mechanical Installations and Structures,
or
- A Technical Vocational High School (TEL) in the specialty of Mechanical Engineering
or
- A Technical Vocational School (TEE) B Cycle in the specialty of Mechanical Engineering
then he/she must have acquired 12 months of previous work experience in welds subject to heavy strain
or
- A Technical Vocational School (TEE) A Cycle, in the Mechanical Engineering Sector
or
- A Technical School of the Mechanical Engineering specialties group
then he/she must have acquired 14 months of previous work experience in welds subject to heavy strain
or
- A middle school – and has reached the age of 18 years
then he/she must have acquired 18 months of previous work experience in welds subject to heavy strain.
If the applicant has obtained the Attestation of Announcement of Welder Technician, then if he/she holds a degree from:
- A Vocational School (EPAS) in the specialty of Chassis or Metal Structures or Shipbuilding, then he/she must have acquired 12 months of previous work experience in welds subject to heavy strain.
or
- A Vocational High School (EPAL) in the Mechanical Engineering Sector, specialty of Mechanical Installations and Structures,
or
- A Technical Vocational High School (TEL) in the specialty of Mechanical Engineering
or
- A Technical Vocational School (TEE) B Cycle in the specialty of Mechanical Engineering
then he/she must have acquired 18 months of previous work experience in welds subject to heavy strain.
or
- A Technical Vocational School (TEE) A Cycle, in the Mechanical Engineering Sector
or
- A Technical School of the Mechanical Engineering specialties group
then he/she must have acquired 24 months of previous work experience, out of which at least 12 months in welds subject to heavy strain.
or
- A middle school – and has reached the age of 18 years
then he/she must have acquired 36 months of previous work experience, out of which at least 24 months in welds subject to heavy strain.
If the applicant is a Chief Arc Welder Technician B class, then he/she must have obtained 6 months of previous work experience in welds subject to heavy strain as a Chief Welder Technician B Class.
If the applicant of any of the above types has attended one or more special Vocational training programs, the corresponding prerequisite service may be replaced up to 25% by those, after the issuance of an Attestation of Announcement or a valid licence
For holders of degrees of corresponding specialtirs obtained in Greece from schools which after the issue of PD 115/2012 have been recognized as equivalent to the aforementioned degrees, the required previous service depends on the equivalence recognized.
For holders of a degree of a corresponding specialty obtained abroad that has been recognized as equivalent to the aforementioned degrees, the required previous service depends on the equivalence recognized.
No
No
6
Educational
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: If the applicant has obtained a degree after the issuance of the relevant licence, he/she must prove it by submitting the relevant degree.
No
No
1
It concerns the first part of the procedure for the Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class
31 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
2
It concerns the second part of the procedure for the Issuance of a licence of Chief Oxygen-Welder Technician A Class - Theoretical exams
33 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
3
It concerns the second part of the procedure for the Issuance of a licence of Chief Oxygen-Welder Technician A Class - Practical exam
79 €
Cost Calculation
One-off
Method of Payment
Digital (web banking)
Type of Cost
Administrative Fee (not provided by e-paravolo webpage)
No
1
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Photocopy of police ID or passport
If the applicant is a citizen of a non-EU country, a residence or work permit issued in accordance with the provisions in force is also submitted
Identification document
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Photocopy of police ID or passport
If the applicant is a citizen of a non-EU country, a residence or work permit issued in accordance with the provisions in force is also submitted
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
2244
2
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class:
a) Clear copy of the Attestation of Announcement of Welder Technician
or
b) Clear copy of the licence of Chief Welder Technician B class
or
c) Clear copy of the licence of Chief Arc Welder Technician A class
or
d) Clear copy of the Attestation of Announcement of Welder Technician B class
or
e) Clear copy of the Attestation of Announcement of Arc Welder Technician B class
or
f) Copy of degree (for those obtained abroad, along with an Equivalence Decision by the EOPPEP)
or
g) Decision of Recognition of professional qualifications by the SAEP.
Approval
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class:
a) Clear copy of the Attestation of Announcement of Welder Technician
or
b) Clear copy of the licence of Chief Welder Technician B class
or
c) Clear copy of the licence of Chief Arc Welder Technician A class
or
d) Clear copy of the Attestation of Announcement of Welder Technician B class
or
e) Clear copy of the Attestation of Announcement of Arc Welder Technician B class
or
f) Copy of degree (for those obtained abroad, along with an Equivalence Decision by the EOPPEP)
or
g) Decision of Recognition of professional qualifications by the SAEP.
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
8880
3
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class:
1. If the applicant worked as an employee:
Proof of previous work experience from the company where the applicant was employed, co-signed by the supervisor (holder of a licence or an attestation of announcement), in which the details of the employer and the supervising licencee or holder of the attestation of announcement - licence number and issuing authority - the details of the person concerned, the duration of employment - exact time of employment in wages -, the specialty and the level to which the person concerned has been trained shall appear.
Proof of Previous Service
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class:
1. If the applicant worked as an employee:
Proof of previous work experience from the company where the applicant was employed, co-signed by the supervisor (holder of a licence or an attestation of announcement), in which the details of the employer and the supervising licencee or holder of the attestation of announcement - licence number and issuing authority - the details of the person concerned, the duration of employment - exact time of employment in wages -, the specialty and the level to which the person concerned has been trained shall appear.
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
4441
4
6. In case of inability to present the above-mentioned supporting documents, as a result of the destruction of records or employment records or from another cause, the following may be accepted as evidence:
Booklets of insurance stamps, as well as any other public document, from which the employment of the applicant in a job position with the same or related object is deduced and the interested party must substantiate in his/her application the reasons for which he/she is unable to provide the necessary supporting documents.
One or more supporting documents are submitted that cover as a minimum the required total duration of previous professional experience.
If the previous experience was acquired in another EU member state the corresponding supporting documents must be validated for their authenticity by the respective competent authorities of that Member State
Proof of Previous Service
6. In case of inability to present the above-mentioned supporting documents, as a result of the destruction of records or employment records or from another cause, the following may be accepted as evidence:
Booklets of insurance stamps, as well as any other public document, from which the employment of the applicant in a job position with the same or related object is deduced and the interested party must substantiate in his/her application the reasons for which he/she is unable to provide the necessary supporting documents.
One or more supporting documents are submitted that cover as a minimum the required total duration of previous professional experience.
If the previous experience was acquired in another EU member state the corresponding supporting documents must be validated for their authenticity by the respective competent authorities of that Member State
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
5
5. If the applicant has acquired experience as an extended-term reserve private or a reserve officer during the fulfillment of his mili-tary obligations:
Attestation from a competent military authority, indicating in detail the type of service performed and its duration
Proof of Previous Service
5. If the applicant has acquired experience as an extended-term reserve private or a reserve officer during the fulfillment of his mili-tary obligations:
Attestation from a competent military authority, indicating in detail the type of service performed and its duration
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
6
4. If the applicant attended a special professional training program:
Certificate of attendance of the special professional training program
Proof of Previous Service
4. If the applicant attended a special professional training program:
Certificate of attendance of the special professional training program
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
7
3. If the applicant was employed in Public Sector, Legal Entity of Public or Private Law and Local Government Authorities:
Hiring decision from which it can be deduced that the applicant and/or the supervisor was hired as a Technician, Chief Technician or Foreman of installations or Decision of the competent authority assigning the tasks of technician, chief technician or foreman, to the interested person, provided that he/she has the required licence, or, in the case of the technician, an attestation of announcement
Proof of Previous Service
3. If the applicant was employed in Public Sector, Legal Entity of Public or Private Law and Local Government Authorities:
Hiring decision from which it can be deduced that the applicant and/or the supervisor was hired as a Technician, Chief Technician or Foreman of installations or Decision of the competent authority assigning the tasks of technician, chief technician or foreman, to the interested person, provided that he/she has the required licence, or, in the case of the technician, an attestation of announcement
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
8
2. If the applicant worked as a self-employed:
Solemn Declaration of Law 1599/1986 stating: a) the duration of the previous work experience with reference to the specialty and the level of employment of the applicant, b) that he/she was employing by a project or employment contract a supervising licencee or a person entitled to supervise - with reference to the name and the number of the Certificate of Announcement or licence of the supervisor, c) that the average annual turnover exceeds 60% of the average annual individual disposable income (MEADE), as calculated by ELSTAT. during the period of acquisition of the experience and d) that he/she possesses the supporting documents described in paragraphs 2.1., 2.2. and 2.3. of article 6 of PD 115/2012.
Proof of Previous Service
2. If the applicant worked as a self-employed:
Solemn Declaration of Law 1599/1986 stating: a) the duration of the previous work experience with reference to the specialty and the level of employment of the applicant, b) that he/she was employing by a project or employment contract a supervising licencee or a person entitled to supervise - with reference to the name and the number of the Certificate of Announcement or licence of the supervisor, c) that the average annual turnover exceeds 60% of the average annual individual disposable income (MEADE), as calculated by ELSTAT. during the period of acquisition of the experience and d) that he/she possesses the supporting documents described in paragraphs 2.1., 2.2. and 2.3. of article 6 of PD 115/2012.
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
Alternative document of:
3
Yes
4441
9
If the degree has been obtained abroad, the applicant must also present: Equivalence decision of the Hellenic Organization for the Certification of Qualifications and Professional Guidance (EOPPEP)
Proof of Study
If the degree has been obtained abroad, the applicant must also present: Equivalence decision of the Hellenic Organization for the Certification of Qualifications and Professional Guidance (EOPPEP)
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Document submitted under requirements:
Yes
Document’s requirement:
Educational
No
2825
10
Issuance of a licence of Chief Oxygen-Welder Technician A Class: Two recent photos
Photograph
No
8298
11
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Copy of degree
Proof of Study
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician A Class: Copy of degree
Submission by:
Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
No
No
2825
12
If the person concerned is a non-EU citizen, a residence or work permit issued in accordance with the applicable provisions must also be submitted.
Residence Permit
If the person concerned is a non-EU citizen, a residence or work permit issued in accordance with the applicable provisions must also be submitted.
Submission by:
Submitted by the applicant (digital), Submitted by the applicant (in person or by post)
Submitted by:
Persons
Document submitted under requirements:
Yes
Document’s requirement:
Citizenship
No
4178
Law
32
4608
2019
66
Α
Description
Replacement of existing licences
Joint Ministerial Decision
8774/15/Φ.350/
2018
340
Β
Description
Appointment of an examination committee of a Region for conducting examinations for several regions
Ministerial Decision
οικ. 46214/146/
2017
203
Υ.Ο.Δ.Δ.
Description
Determination of Compensation of the Examination Committees
Law
112
4314
2014
265
Α
Description
Date of commencement licences
Amendment:
- Law 4303/2016 (GG 125/Α/2016) article 16 par. 2 - Amending article 112 of Law 4314/2014
Presidential Decree
122
2014
196
Α
Description
Vocational Training Programs
Joint Ministerial Decision
οικ. 455/22/Φ.Γ.9.6.4./
2013
34
Β
Description
Inclusion in ΚΕP-EKE (Points of Single Contact)
Joint Ministerial Decision
οικ. 458/26/Φ.Γ.9.6.4/
2013
32
Β
Description
Inclusion in ΚΕP-EKE (Points of Single Contact)
Joint Ministerial Decision
οικ. 8441/560/ΦΓ9.6.4/
2013
1643
Β
Description
Annex C - Examination material of Technical Mechanical Installations 1st, 2nd, 3rd and 4th Specialty
Joint Ministerial Decision
οικ. 14132/924/ΦΓ9.6.4./
2013
3133
Β
Description
Licensing of examination bodies for the issuance of a Licence to practice technical professions
Joint Ministerial Decision
οικ. 411/14/Φ.Γ.9.6.4./
2013
21
Β
Description
Examination procedure
Amendments:
- Law 4605/2019 (GG 52/Α/2019) par. 1 art. 18 - Amending par. 2 art. 2 of JMD 411/14/Φ.Γ.9.6.4./2013 (Assessment Committee - Office Term)
- JMD 5571/379/ΦΓ9.6.4./2013 (GG 10228/Β/2013) Case. 1 art. 1 - Amending case α art. 5 of JMD 411/14/Φ.Γ.9.6.4./2013 (Prior Service Record), case 2 - Amending Annexes of JMD 411/14/Φ.Γ.9.6.4./2013 (Annexes)
Presidential Decree
115
2012
200
Α
Description
Prerequisites - Supporting Documents - Procedure – Checks
Amendments
- Law 4608/2019 art. 32 - Amending par. 3 art. 1 of PD 115/2012 (Replacement of old licences)
- Law 4605/2019 (GG 52/Α/2019) par. 1 art. 15 - Addition of par. 12 to PD 115/2012 (Absence of Assessment Committee in Regional Units), art. 15 - Amending par. 1, 2 and 3 art. 18 of PD 115/2012 (Accepted Educational Titles)
Law
3982
2011
143
Α
Description
Procedure - Definitions - Scope of responsibility
Amendments:
- Law 4712/2020 (GG 146/Α/2020) par. 1 art. 35 - Addition of art 11α to Law 3982/2011 (Establishment of a Unified Register of Elevators) - Law 4653/2020 art. 45 - Amending par. 16 art. 5 of Law 3982/2011 (Certificate programs for proof of prior service)
- Law 4254/2014 (GG 85/Α/2014) par. 1 subpar.ΣΤ23 art.1 - Amending par. 3-6 of articles 2 of Law 3982/2011 (Definitions), par. 2 subpar. ΣΤ23 art. 1 - amending par. 1 art. 3 of Law 3982/2011 (Scope), par. 5 subpar. ΣΤ23 art. 1 - Amending par. 2 art. 16 of Law 3982/2011 (Abolished provisions), par. 4 subpar. ΣΤ23 art. 1 - Amending par. 11 art. 4 of Law 3982/2011 (Obligation to issue Announcement Certificates)
- Law 4403/2016 (GG 125/Α/2016) par. 1 art. 15 - Amending par. 8 art. 5 of Law 3982/2011 (Case of non-establishment of an Examination Committee in a Region)
- Law 4072/2012 (GG 86/Α/2012) par. 1 art. 228 - Amending art. 1 of Law 3982/2011 (Purpose), par. 3 art. 228 - Amending par. 5 art. 2 of Law 3982/2011(Definitions), par. 4 art. 228 - Amending par. 1 art. 3 of Law 3982/2011 (Scope), par. 5 art. 228 - Amending art. 4Α of Law 382/2011 (Requirements for the establishment, expansion, operation and control of facilities), par. 6 art. 228 - Amending art. 16 of Law 382/2011 (Abolished provisions), par. 7 art. 28 - Amending par. 14 art. 17 of Law 3982/2011 (Definitions)
1
Authorisation to participate in examinations: Presentation of the Application
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician Α Class: The applicant presents the Application - Solemn Declaration, with the required supporting documents attached, to an executive of the Department of Professions
No
No
2
Authorisation to participate in examinations: Submission of application and of required documents
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
For the authorisation of participation in examinations in order to obtain the license of a Chief Oxygen-Welder Technician Α Class,
the interested party submits the Application - Solemn Declaration, with the required supporting documents attached, to the Protocol Office of the relevant Region or to the KEP-EKE (Points of Single Contact).
No
No
3
Authorisation to participate in examinations: Notification of the interested party
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Authorisation to participate in examinations for a licence of Chief Oxygen-Welder Technician Α Class: An executive of the Department of Professions notifies the interested party to come and collect the Attestation of Submission of supporting documents and the invitation to take the examination; he/she forwards a copy of the signed Attestation, to the Examination Committee
No
No
4
Issuance of licence: Submission of the proof of deposit
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class: The applicant submits the proof of deposit of the examination fees of the theoretical and practical part to the Department of Professions
The submission of the supporting documents by the interested party follows the same course of the document as in the initial submission.
No
No
5
Issuance of licence: Theoretical part of the examination
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class: The applicant is examined on the theoretical part of the specialty by the Examination Committee
No
No
6
Issuance of licence : Preparation of a Minutes of Examination
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class: The Examination Committee prepares a Minutes of Examination of the theoretical part with the detailed list of successful and unsuccessful candidates, which is signed by all the members, and is finally given to the applicant.
Notes
In case the interested party fails in the examination of the theoretical part, he / she re-submits the application for participation in the examinations with the Certificate of Submission of Supporting Documents (if valid) and the participation fee for the examinations of the theoretical part re-attached.
No
No
7
Issuance of licence: Practical part of the examination
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class:
The applicant is examined on the practical part of the specialty by the Examination Committee
Notes
In case the interested party fails in the examination of the practical part, he / she re-submits the application for participation in the examinations with the Certificate of Submission of Supporting Documents (if in force), the Minutes of the theoretical part examination and the participation fee for the practical part examinations.
No
No
8
Issuance of licence: Preparation of Minutes of the Examination of the practical part
Responsible for Implementation
Collective body
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class:
The Examination Committee prepares Minutes of the Examination of the practical part with the detailed list of the successful and unsuccessful candidates, and of Certificates of Successful Examination, which is then signed by all the members and finally issued to the applicant
No
No
9
Issuance of licence
Responsible for Implementation
Competent Employee
Μethod of Implementation
Manual Action
Description
Issuance of licence of Chief Oxygen-Welder Technician Α Class:
An Executive of the Department of Professions issues the licence of Chief Oxygen-Welder Technician Α Class and notifies the applicant to collect it.
Notes
If an interested party considers that his/her application has been rejected without a legitimate reason or that the administration is unreasonably late, he/she may appeal to the ordinary court against the act or omission of the administrative authority.
No
Yes
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
